Please read all sections of this manual throughly to familiarize yourself with all aspects of the unit.
Installation NOTE:This unit is not intended for use by persons(including children)with minimum physical abilities,sensory,mental capabilities or instruction concerning use of the appliance by the operator responsible for their safety.Children should be supervised to ensure that they do not play with the appliance.
1.Remove the corrugated container and packing materials and keep them for possible future use.
CAUTION!When handling the machine never trip it by the tanks/bowls or evaporator cylinders.The manufacturer never and supplier will Not be held responsible for any damages which may occur through incorrect handling.
2.Inspect the uncreated unit for any possible damage.
1)If any damage,please call the delivering caeeier immediately.
2)If the power cord is damaged,it must be replaced by the manufacturer,service agent or a qualified electrician in order to avoid any hazard.
3.Install the unit on a counter top that will support the combined weight of the dispenser and product,bearing in mind what is stated in the preceding point,CAUTION paragraph.
4.When installing the unit allow for adequate air space.Facing the unit from the dispensing side,a minimum of 15 cm(6'')of free air space should be allowed at the rear and on each side of the machine.
5.Ensure that the foot pieces are screwed tight into the base of the machine.
6.Clean and sanitize the unit according to the instructions in the manual.See the "CLEANING"paragraph.
If you are picking a snow melting machine, you can take our snow melting machine into consideration.